FLUKE 1555 - 10KV insulation tester - FLUKE-1555

Fluke 1555 - Insulation Tester 10KV - FLUKEFluke 1555 - Insulation Tester 10KV - FLUKEFluke 1555 - Insulation Tester 10KV - FLUK

Fluke 1555 - Insulation Tester 10KV - FLUKEFluke 1555 - Insulation Tester 10KV - FLUKEFluke 1555 - Insulation Tester 10KV - FLUK

More details

 

FLUKE-1555

Period 10 weeks

6 640,00 € tax excl.
7 968,00 €tax incl.


Comment faire une demande de devis : Transformer mon panier en devis
Demo

Notes et avis clients

personne n'a posté d'avis encore
dans cette langue
Noter / écrire un commentaire

 

Features and Benefits:
Test voltages up to 10 kV to provide solutions for applications Autès
Security Level CAT III 1000 V and CAT IV 600 V
Breakdown detector warning you of the presence of voltage and providing a reading up to 600 V AC or DC.
Selectable test voltages in steps of 50 V (250 V to 1000 V) and in steps of 100 V (beyond 1000 V)
Up to 99 memory slots to record your measurements and findeasily through a user-defined label for each location
Great auànomie batteries allow the user to perform more than 750 checks between two reloads.
Auàmatique calculation of dielectric absorption (DAR) and polarization index (PI) without additional configuration
The protection system eliminates the impact of surface leakage current measurements on high resistance.
Large LCD digital / analog for maximum comfort
Capacitance and leakage current
Ramp function controls for breakdown
Resistance measurements up to 2 TΩ
Timing parameters for up to 99 minutes timed controls
3 years warranty
Electrical Characteristics

The precision of the specified controller is based on a cycle of one year after calibration, for operating temperatures between 0 ° C and 35 ° C. For operating temperatures below and above this range (that is, between -20 ° C and 0 ° C and 35 ° C and 50 ° C), add ± 0.25% per ° C, except for bands for which 20% should be added ± 1% per ° C.

 

 

 

Test voltage (DC)RangeAccuracy (± reading)
250 V<200 k="" span="">unspecified
200 k to 5 GΩ5%
5 GΩ 50 GΩ20%
> 50 GΩunspecified
500 V<200 k="" td="">unspecified
200 k to 10 GΩ5%
10 GΩ to 100 GΩ20%
> 100 GΩunspecified
1000 V<200 k="" td="">unspecified
200 k to 20 GΩ5%
20 GΩ to 200 GΩ20%
> 200 GΩunspecified
2500 V<200 k="" td="">unspecified
200 k to 50 GΩ5%
50 GΩ to 500 GΩ20%
> 500 GΩunspecified
5000 V<200 k="" td="">unspecified
200 k to 100 GΩ5%
100 GΩ to 1 TΩ20%
> 1 TΩunspecified
10000 V<200 k="" td="">unspecified
200 k to 200 GΩ5%
200 GΩ to 2 TΩ20%
> 2 TΩunspecified
Range bar charts0-1 TΩ
Precision voltage insulation testing-0%, +10% With a load current of 1 mA
Rejection of AC induction2 mA maximum
Charging time for the capacitive load5 seconds per uF
Discharge time for the capacitive load1.5 s / uF
RangeAccuracy
Measurement of leakage currents1 nA to 2 mA± (5% + 2 nA)
Capacity measure0.01 uF 15.00 uF± (1My 5%. + 0.03 uF)
TimerRangeTimer
0 to 99 minutesSettings: 1 minute Display: 1 second
Audible warning of live circuitsRange of the hornVoltage accuracy
30 V to 660 V AC / DC, 50/60 Hz± (15% + 2 V)
General Characteristics
Display
(75 mm x 105 mm)
Food
Battery 12 V lead-acid rechargeable Yuasa NP2.8-12
Charger input (AC)
85 V AC 50/60 Hz 20 VA
This tool Class II (double insulation) comes with a power cord (grounded) Class I. This camee protective earth (ground clamp) is not connected internally. The extra clamp serves only to increase the retention of the plug.
Dimensions170 mm x 242 mm x 330 mm
Weight3.6 kg
Temperature (operating)-20 ° C to 50 ° C
Temperature (sàckage)-20 ° C to 65 ° C
Humidity80% at 31 º C decreasing linearly to 50% at 50 º C
Altitude2000 m
Enclosure ratingIP40
Protection against overload input1000 V AC
EMCEN 61326
Compliance with safety standardsCAT III 1000 V, CAT IV 600 V
Pollution Degree2

Avis

Soyez le premier à donner votre avis !

8 other products in the same category: