Distrimesure présente son offre : FLUKE 975V analyseur de qualité d'air AirMeter™ option vitesse FLUKE975V.

Send to a friend
Send to a friend

Distrimesure présente son offre : FLUKE 975V analyseur de qualité d'air AirMeter™ option vitesse FLUKE975V.
FLUKE 1503 Insulation TesterFLUKE 1503 Insulation TesterFLUKE 1503 Insulation Tester
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

FLUKE 1503 Insulation TesterFLUKE 1503 Insulation TesterFLUKE 1503 Insulation Tester

More details

Reference: FLUKE-1503

within 2 weeks

Range of insulation testing:
- 1507: 0.01 MΩ to 10 GΩ
- 1503: 0.1 MΩ to 2000 MΩ
Control voltages of isolation:
- 1507: 50 V, 100 V, 250 V, 500 V, 1000 V
- 1503: 500 V, 1000 V
Automatic calculation of Polarization Index and Dielectric Absorption rate for productivity and profitability (only available on model 1507)
Possibility of repeating simple controls through the comparison function of 1507 ("good / bad") (available only on 1507)
Simplification of controls repetitive or difficult to access with the probe with remote control button
Detection circuits to prevent control voltage isolation in case of voltage above 30 V
Automatic discharge of capacitive voltage for added protection
AC / DC voltage: 0.1 V to 600 V
200 mA Continuity
Resistance: 0.01 Ω to 20.00 kΩ
Auto power off to extend battery life
Easy to read measurements using the large backlit display
Overvoltage category CAT IV 600 V for better protection
Remote probe, test leads, probes and alligator clips included with each contrôleur
Opportunity to benefit from the suspension system Fluke TPAK magnet (optional) in order to free your hands for other tasks
Four AA alkaline batteries (NEDA 15A or IEC LR6) for at least 1000 controls isolation
1 year warranty

Measure voltage AC / DC

Accuracy

Range	600.0 V
Resolution	0.1 V
50 Hz to 400 Hz ± (% rdg. + Points)	± (2% + 3)

Input Impedance

3 MΩ (nominal), <100 pf="" td="">

Report CMRR (1 kΩ unbalanced):

> 60 dB DC, 50 or 60 Hz

Protection against overload

600 V RMS or DC

Resistance measurement of the mass continuity

Range / Resolution

20.00 Ω	0.01 Ω
200.0 Ω	0.1 Ω
2000 Ω	1.0 Ω
20.00 kΩ	0.01 kΩ

Accuracy

± (1.5% + 3)

Protection against overload

2 V RMS or DC

Test voltage open circuit

> 4.0 V, <8 v="" td="">

Short-circuit

> 200.0 mA

Characteristics of the insulation monitor

Display Range

1507:	0.01 MΩ to 10 GΩ
1503:	0.01 MΩ to 2000 MΩ

Test voltages

1507:	50 V, 100 V, 250 V, 500 V, 1000 V
1503:	500 V, 1000 V

Accuracy of the test voltage

+20%, -0%

Short-circuit

1 mA nominal

Automatic discharge

Discharge time <0.5 seconds="" if="" c="1" uf="" or="" less="" td="">

Live circuit indicator

Control prohibited if terminal voltage> 30 V prior to initiation of control

Maximum capacitive load

Operational for more than 1 uF load

Measuring accuracy:

50 V:	± (3% + 5)
100 V:	± (3% + 5)
250 V:	± (1.5% + 5)
500 V:	± (1.5% + 5)
1000 V	± (1.5% + 5) to 2000 MΩ, ± (10% + 3) above 2000 MΩ

General Characteristics

Maximum voltage applied to a terminal:

600 V AC, DC or RMS

TemperatureStorage

-40 ° C to 60 ° C

Operating Temperature

-20 ° C to 55 ° C

Temperature Coefficient

0.05 x (specified accuracy) per ° C for temperatures <18 c="" or=""> 28 ° C

Relative Humidity

	0% - 95% at 10 ° C - 30 ° C
	0% - 75% at 30 ° C - 40 ° C
	0% - 40% at 40 ° C - 55 ° C

Vibrations

Random, 2 g, 5-500 Hz per MIL-PRF-28800F for a Class 2

Shocks

Fall from a height of 1 meter per IEC 61010-1 2nd edition (drop test from a height of 1 meter, six sides, oak floor)

EMC:

In an RF field of 3 V / M, accuracy = specified accuracy (EN 61326-1:1997)

Security

Complies with ANSI / ISA 82.02.01 (61010-1) 2004, CSA C22.2 NO. 61010-1-04 and IEC / EN 61010-1 2nd Edition for Measurement Category IV 600 V (CAT IV)

Certifications:

CSA per standard CSA / CANC22.2 No. 61010.1-04; TUV to IEC / EN 61010-1 2nd edition

Batteries

Four AA batteries (NEDA 15A or IEC LR6)

Battery

Use of insulation testing:	The controller can achieve a minimum of 1 000 inspections of isolation with fresh alkaline batteries at room temperature. These are standard controls of 1000 V into 1 MΩ with a duty cycle of 5 seconds of activation and deactivation of 25 seconds.
Resistance measurements:	The controller can achieve at least 2500 resistance measurements of the mass continuity with fresh alkaline batteries at room temperature. These are standard controls of 1 Ω with a duty cycle of 5 seconds of activation and deactivation of 25 seconds.

Dimensions

5.0 x 10.0 x 20.3 cm (H x W x D)

Weight

550 g

IP level

IP40

Altitude