Fluke 27 II - IP67 rugged 6000-count industrial multimeter - FLUKE-27II

Send to a friend
Send to a friend

Fluke 27 II - IP67 rugged 6000-count industrial multimeter - FLUKE-27II
Fluke27 II Industrial MultimeterFluke27 II Industrial MultimeterFluke27 II Industrial Multimeter
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

Fluke27 II Industrial MultimeterFluke27 II Industrial MultimeterFluke27 II Industrial Multimeter

Reference: FLUKE-27II/EUR

within 2 weeks

The new standard in robustness

The new DMMs Fluke 27 II and 28 II set a new standard in terms of operating in extreme conditions by providing the functionality and accuracy necessary to troubleshoot most electrical problems. Both multimeters are certified IP 67 (water resistance and dust) and are MSHA approved (application pending). They offer a wide operating temperature range, from -15 ° C to +55 ° C (-40 ° C for 20 minutes) with 95% humidity and were designed and tested to withstand a fall of 3 m . The new Fluke 20 are designed to operate in extreme environments.

Measure up to 1000 V AC and DC
Measure up to 10A (20A for 30 seconds)
Capacity range from 10 000 uF
Frequency of 200 kHz
Extended Bandwidth: 15 Hz to 20 kHz (28 II), 40 Hz to 30 kHz (27 II)
Built-in thermometer for conducting temperature measurements with ease, without additional instrument (28 II)
Resistance measurements, continuity and diode
Recording average values and min / max to captureautomatically changes
Peak min-max (28 II)
Single-function precise measurement of the frequency and voltage on the variable speed drives and other equipment "noisy" (28 II)

Features:

New IP 67 protection against dust and water and sealed for use in extreme environments
Designed to withstand a fall of 3 meters (with case)
Display Mode 20 000 points resolution (28 II)
AC TRMS voltage and current for accurate measurements on non linear signals (28 II)
Voltage and current measurement means (27 II)
The new keyboards with backlit buttons enable a better visibility in low light areas
Display with large digits and backlight white light at two levels for superior visibility
Case reversible for extra protection when not in use
Withstands voltage spikes Dangerous 8000 V due to switching of loads and failures occurring in industrial circuits. In addition, it conforms to standards for electrical safety IEC (second edition)and ANSI
Great battery life (800 hours)
Method of measure to remove the test lead resistance from low ohms measurements
Auto-ranging and manual for maximum flexibility
Magnetic suspension (optional) to use the device with maximum comfort and keep hands free for other tasks
MSHA (application pending)

Specifications for accuracy

Voltage DC

Range	0.1 mV to 1000 V
Accuracy	27 II: 0.1% + 1 28 II: 0.05% + 1

AC voltage

Range	0.1 mV to 1000 V
Accuracy	27 II: 0.5% + 3 28 II: 0.7% + 4

Range	0.1 uA to 10 A
Accuracy	27 II: 0.2% + 4 28 II: 0.2% + 4

Range	0.1 uA to 10 A
Accuracy	27 II: 1.5% + 2 28 II: 1% + 2

Resistance

Range

0.1 Ω to 50 MΩ

Taken displayed

27 II	6 000
28 II	6 000/19 999

Capacity

1 nF to 9999 uF

Frequency

0.5 Hz to 199.99 kHz

Temperature

27 II: s / o
28 II: - 200 ° C to 1090 ° C

Lowpass filter (measured variable speed)

27 II: s / o
28 II: Yes

Compliance

CAT IV 600 V and CAT III 1000 V

IP protection index

27 II:	IP 67
28 II:	IP 67

Food

3 AA batteries

Battery

800 hours

General Characteristics

Display

Bar Graph / backlight

Yes / Yes

Data Storage

Capture transient peaks	ĨS 250 (28 II)
Min / Max / Avg	Yes
Freeze of taking measurements	Yes

Other functions

Statements measure (zero)	Yes
Battery Type	3 AA batteries

Warranty and Protection

Security Level	CAT IV 600 V / CAT III 1000 V
External protection	Rubber Case
Shocks	Drop test from a height of 3 m
Resistance to dust / water	Yes, certified IP 67
Warranty	Limited Warranty
Dimensions (H x W x D) with case	6.35 cm x 10 cm x 19.81 cm
Weight with Case	698.5 g

Avis

Soyez le premier à donner votre avis !

Accessoires

AC Current Clamp Fluke I400AC Current Clamp Fluke I400AC Current Clamp Fluke I400

personne n'a posté d'avis encore dans cette langue
Noter / écrire un commentaire

Catégories de blog

Fluke 27 II - IP67 rugged 6000-count industrial multimeter - FLUKE-27II

Send to a friend

Avis

Newsletter