Fluke 725 Multifunction Process Calibrator

Fluke 725 Multifunction Process Calibrator

Fluke 725 Multifunction Process CalibratorFluke 725 Multifunction Process CalibratorFluke 725 Multifunction Process Calibrator

More details

 

FLUKE-725

within 3 / 4 weeks

3 314,00 € tax excl.
3 976,80 €tax incl.


Demande de devis :

Ajouter au devis

Demo

Notes et avis clients

personne n'a posté d'avis encore
dans cette langue
Noter / écrire un commentaire

 

Take with you the new Multifunction Process Calibrator Fluke 725 and you will be equipped to test and calibrate almost any process parameter. Measure and milliamps, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules.
You need to calibrate transmitters? The display of the subdivided model 725 allows you to simultaneously view the input values ​​and output. To test the valve and I / P, you can generate currents (mA) while measuring pressure. The 725 has functions of automatic step and ramp automatic remote testing, plus a step of 25% for fast linearity tests.
Once you take hold of the Fluke 725, it is ready for operation. Its simple controls, without menus, make operation very easy. Its memory functions make setup fast.

 

Calibrator Fluke 725 Multifunction Process Calibrator is a powerful field, now very easy to use. Use of generation and measurement functions to test and calibrate most process parameters.

Measuring accuracy
Voltage DC
30.000 V0.02% + 2 counts (upper display)
30.000 V0.02% + 2 counts (lower display)
100.00 mV0.02% +2 counts
of -10.00 mV to 75.00 mV0.025% + 1 count (via TC connector)
DC
24.000 mA0.02% +2 counts
Resistance
from 0.0 to 400.0 Ω0.1 Ω (4 son), 0.15 Ω (2 and 3 son)
from 401 to 1500 Ω0.5 Ω (4 son), 1 Ω (2 and 3 son)
from 1500 to 3200 Ω1 Ω (4 son), 1.5 Ω (2 and 3 son)
Frequency
from 2.0 to 1000.0 CPM0.05% + 1 count
from 1.0 to 1100.0 Hz0.05% + 1 count
1.00 to 10.00 kHz0.05% + 1 count
SensitivityMinimum 1 V peak to peak
Pressure
Accuracyof 0.025% of range using any of 29 pressure modules.
(For detailed specifications, refer to pressure modules in options and accessories)
Modules available for differential, gage, absolute, double and high, and emptiness.
Source Accuracy
Voltage DC
100.00 mV0.02% +2 counts
10.000 V0.02% +2 counts
of -10.00 mV to 75.00 mV0.025% + 1 count (via TC connector)
DC
24.000 mA (Source)0.02% +2 counts
24.000 mA (simulation)0.02% +2 counts
Resistance
from 15.0 to 400.0 Ω0.15 Ω (current exc. 0.15 to 0.5 mA), 0.1 W (power of exclusion. 0.5 to 2 mA)
from 401 to 1500 Ω0.5 Ω (excitation current 0.05 to 0.8mA)
from 1500 to 3200 Ω1 Ω (excitation current 0.05 to 0.4 mA)
Frequency
from 2.0 to 1000.0 CPM0.05%
from 1.0 to 1100.0 Hz0.05%
1.00 to 10.00 kHz0.25%
Waveform:5 V peak to peak square wave, -0.1 V offset
RTDs and thermocouples
Measuring accuracy:
NI-1200.2 ° C
PT-100 (385)0.33 ° C
PT-100 (393)0.3 ° C
PT-100 (JIS)0,3C
PT-200 (385)0.2 ° C
PT-500 (385)0.3 ° C
PT-1000 (385)0.2 ° C
Resolution:0.1 ° C
J:0.7 ° C
K:0.8 ° C
T:0.8 ° C
E:0.7 ° C
A:1.8 ° C
S:1.5 ° C
B:1.4 ° C
L:0.7 ° C
U:0.75 ° C
N:0.9 ° C
ResolutionJ, K, T, E, L, N, U: 0.1 ° CB, R, S: 1 ° C
XK0.6 ° C
BP1.2 ° C
Precision source:
NI-1200.2 ° C
PT-100 (385)0.33 ° C
PT-100 (393)0.3 ° C
PT-100 (JIS)0.3 ° C
PT-200 (385)0.2 ° C
PT-500 (385)0.3 ° C
PT-1000 (385)0.2 ° C
Resolution:0.1 ° C
Note:Accuracy is defined for a measure to 4 son.
J:0.7 ° C
K:0.8 ° C
T:0.8 ° C
E:0.7 ° C
A:1.4 ° C
S:1.5 ° C
B:1.4 ° C
L:0.7 ° C
U:0.75 ° C
N:0.9 ° C
ResolutionJ, K, T, E, L, N, U:0.1 ° CB, R, S: 1 ° C
XK0.6 ° C
BP1.2 ° C
Specifications
Ramp functions
Source functions:Voltage, current, resistance, frequency, temperature
RampsSlow ramp, fast ramp, levels of 25%
Loop Power Function
Voltage:24 V
Accuracy:10%
Maximum current:22 mA, protected against short circuits
Functions notnot
Source functions:Voltage, current, resistance, frequency, temperature
Levels25% of the range, 100% of range
Environmental Specifications
Operating Temperature
-10 ° C to +55 ° C
Storage temperature
-20 ° C to 71 ° C
Operating Altitude
3,000 m
Safety Features
Compliance with safety standards
Certified EN 61010-1: 1993, ANSI / ISA S82.01-1994, CAN / CSA C22.2 No. 1010.1: 1992
Mechanical & General Specifications
Dimensions
130 x 236 x 61 mm
Weight
0.65 kg
Batteries
4 AA alkaline batteries
Battery Replacement
Separate battery compartment, accessible without breaking calibration seal
Side port connections
Pressure module connector, also used for programming real-time remote

 

 

Avis

Soyez le premier à donner votre avis !

Accessoires

30 other products in the same category: